a tiny voice in my heart says..

salam wth..

old blog.new address.

yesterday i logged in my space blog. msn asked me whether i want to move my blog from space to wordpress.

they offered to help me moving.with all the contents.this is what they said.

then i agreed, since mr nasrul hadi always babbled space is hard to give comment.

tadaa…here is my new blog.ok la..

the problem is..they said they can move all data..i repeat… all data! but now my friends’ blog links are all disappeared. i did not make a copy, since they said they can move all! plus, from today i can’t enter my space anymore.so i can’t copy them forever..

my fault or their fault?

ish ish..so friends, give me your blog address please..to be put here~

after all, thank you to msn for helping me move..kekeke..

LMS?LCMS?HCI?ICT? *sigh*

salam wth…

saya masih tidak tidur walaupun jam menunjukkan nombor 2.27 pagi…
saya pun taktahu buat apa..tiba tiba dah pukul dua…
konon konon sambil cari bahan untuk exam, hopping blog to blog..
then konon konon lagi cari bahan untuk exam, pergi chatting pula dengan kawan smap yang sangat sudah lama tidak bercontact…
then konon konon lagi cari bahan..saya pergi baca paper pula tengah tengah malam ni…

nanti prof bahar tanya pasal LMS dan LCMS tau jawab?
pasal ADDIE?
pasal HCI?
ok la…paling cikai la…pasal ICT in T&L..tau?

*semoga syifa gelabah bila diingatkan segala topic yang perlu distudy ini..*sigh*…*
*ramai pulak orang wish congratz for the marriage hari ini..kami ni baru kahwin dua minggu lepas ke? hehe…apa pun, thank you kerana menganggap kami masih pengantin..kekek…dan sempena dengan itu, saya nak promote photographer kami, kamarul aka ABON supaya anda berminat menghirenya walaupun hanya untuk cukur jambul anak nanti http://freelancefotographer.net/blog/ *

시스템응용

#include <stdio.h>
#include <conio.h>
#include "C:/eboard/eblib.h"
#define BASE_ADDR 0x00
#define PORTA  BASE_ADDR | 0x04
#define PORTB  BASE_ADDR | 0x05
#define PORTC  BASE_ADDR | 0x06  
#define CWR0  BASE_ADDR | 0x07 
#define CWR1  BASE_ADDR | 0X0b
void init_eboard(void)
{
 outp(CWR0,0X88);
 outp(CWR1,0x80);
 outp(PORTA, 0xff);
}
void main(void)
{
 int i,count,quot,rem;
 unsigned out;
 if(InitDriver(EB_DEVICE_PCI))
 {
  printf("Device Driver Loading Fail!rn");
  return;
 }
 //clrscr();
 init_eboard();
 printf("nPush a Button Switch (SW1,SW2,SW3,SW4).n");
 do
 {
  i=((0xff-inp(PORTC))>>4)& 0x0f;
  if(i==1)
  {for(i=1;i<11;i++)
    count=count+i;
   quot=count/10;
   rem=count%10;
   out=quot|(rem<<4);
   outportb(PORTB, out);
  }if(i==8)
  {for(i=11;i<17;i++)
    count=count+i;
    quot=count/10;
    rem=count%10;
    out=quot|(rem<<4);
    outportb(PORTB,out);  
  }count=0;
 }while(!kbhit());
 init_eboard();
}
   
 
 
#include <stdio.h>
#include <conio.h>
#include "C:/eboard/eblib.h"
#define BASE_ADDR 0x00
#define PORTA  BASE_ADDR | 0x04
#define PORTB  BASE_ADDR | 0x05
#define PORTC  BASE_ADDR | 0x06  
#define CWR0  BASE_ADDR | 0x07 
#define CWR1  BASE_ADDR | 0X0b
void init_eboard(void)
{
 outp(CWR0,0X88);
 outp(CWR1,0x80);
 outp(PORTA, 0xff);
}
void main(void)
{
 int i,j,count;
 unsigned out;
 if(InitDriver(EB_DEVICE_PCI))
 {
  printf("Device Driver Loading Fail!rn");
  return;
 }
 //clrscr();
 init_eboard();
 printf("nPush a Button Switch (SW1,SW2,SW3,SW4).n");
 do
 {
  i=((0xff-inp(PORTC))>>4)& 0x0f;
  if(i==4) {
   outp(PORTB,0x33);
   printf("Push Button 3(SW3)is on.n",i);
   delay(50);
  }
   if(i==1) {
   outp(PORTB,0x77);
   printf("Push Button 1(SW1)is on.n",i);
   delay(50);
  }
   if(i==2) {
   outp(PORTB,0x77);
   printf("Push Button 2(SW2)is on.n",i);
   delay(50);
  }
   if(i==8) {
   outp(PORTB,0x77);
   printf("Push Button 4(SW4)is on.n",i);
   delay(50);
   }
 }while(!kbhit());
 init_eboard();
}

어렵지만…재밌대..ㅎㅎ

오늘 CAD 수업이 진짜 재밌고 우린 즐겁게 보냈다…ㅎㅎㅎ
 
먼저….
 
"error가 21개"
"헉…그게 말이 돼???…"
 
ㅋㅋㅋ
 
담에….
 
"마리아가 화낼거야..내가 찍어줄게…"
 
ㅎㅎ 스트레이스일때..진짜 웃겨..
 
담에….
 
"지워줄까 ..?!"
"네…"
"내가 지워줄께..~~~"
 
ㅋㅋㅋ이 사람..정말…
 
마지막….
 
"찍던 사진들..어디야..?.."
 
이럴수가 ~….ㅎㅎ
 
4 jokers…n 2 victims..진짜..~
 
어렵지만…재밌대…마리아가…